Strap change
Play video
STEP 1

STEP 1

TAKE OUT YOUR NEW BREITLING STRAP FROM THE BREITLING TRAVEL POUCH. YOU MIGHT USE THE BREITLING SPRING BAR TOOL IF YOU ALSO ORDERED ONE, OR A GENERIC STRAP-CHANGING TOOL WILL ALSO WORK.

STEP 2

STEP 2

INSTALL YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE AND PLACE THE FORKED END OF THE TOOL BETWEEN ONE OF THE LUGS AND THE STRAP'S SIDE.

PRECAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

STEP 3

STEP 3

TAKE OF YOUR NEW BREITLING STRAP AND PLACE IT AT THE SAME POSITION WHERE YOU REMOVED THE PREVIOUS STRAP. INSERT MANUALLY THE PINS OF THE SPRING BAR INTO THE LUG HOLE WITH THE FORKED END OF THE STRAP-CHANGING TOOL.

CHECK THAT YOUR NEW STRAP IS SAFELY FIXED BY SLIGHTLY PULLING ON ITS TWO PARTS.

ENJOY YOUR BREITLING ON ITS NEW STRAP.

Play video
STEP 1

STEP 1

TAKE OUT YOUR NEW BREITLING STRAP FROM THE BREITLING TRAVEL POUCH. YOU MIGHT USE THE BREITLING SPRING BAR TOOL IF YOU ALSO ORDERED ONE, OR A GENERIC STRAP-CHANGING TOOL WILL ALSO WORK.

STEP 2

STEP 2

INSTALL YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE AND OPEN THE BRACELET.

HOLD THE BUCKLE FIRMLY AND PUSH THE PIN OUT OF IT USING THE POINTED TIP OF THE TOOL.

STEP 3

STEP 3

HOLD YOUR BREITLING WATCH FIRMLY AND REMOVE THE BRACELET.

PULL THE PIN AWAY FROM THE LUG HOLE USING THE FORKED END OF YOUR THE TOOL.

PRECAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

ROTATE YOUR WATCH AND REMOVE THE SECOND SPRING BAR THE SAME WAY.

ROTATE THE WATCH AGAIN, BACK TO ITS ORIGINAL POSITION.

STEP 4

STEP 4

INSERT THE NEW STRAP BETWEEN THE LUGS USING THE FORKED END OF THE TOOL BY CAREFULLY INSERTING THE SPRING BAR IN THE CORRESPONDING LUG HOLE.

TAKE OF YOUR NEW BREITLING STRAP AND PLACE IT AT THE SAME POSITION WHERE YOU REMOVED THE PREVIOUS STRAP.

HOLD YOUR BREITLING WATCH FIRMLY AND INSERT MANUALLY ONE PIN OF THE SPRING BAR INTO THE LUG HOLE WITH THE FORKED END OF THE STRAP-CHANGING TOOL.

WHILE HOLDING THE SPRING BAR IN POSITION, PUSH BACK THE SECOND PIN OF THE SPRING BAR INTO THE OPPOSITE LUG HOLE USING THE FORKED END OF THE TOOL.

PRECAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

ROTATE YOUR WATCH AND REPEAT THE OPERATION WITH THE 2ND PART OF YOUR BREITLING STRAP.

CHECK THAT YOUR NEW STRAP IS SAFELY FIXED BY SLIGHTLY PULLING ON ITS TWO PARTS.

ENJOY YOUR BREITLING ON ITS NEW STRAP.

Play video
STEP 1

STEP 1

TAKE OUT YOUR NEW BREITLING NATO STRAP FROM THE BREITLING TRAVEL POUCH.

STEP 2

STEP 2

INSTALL YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE AND REMOVE THE CURRENT NATO STRAP.

PULL OUT THE NATO STRAP FROM THE INTERMEDIARY BUCKLE.

HOLD YOUR BREITLING WATCH FIRMLY AND REMOVE COMPLETELY THE NATO STRAP BY SLIDING IT UNDER THE TWO SPRING BARS.

STEP 3

STEP 3

FIT YOUR NEW NATO STRAP ON YOUR BREITLING.

PASS THE NATO STRAP BETWEEN THE LUGS THROUGH BOTH SPRINGS BARS.

PASS THE NATO STRAP THROUGH THE INTERMEDIARY BUCKLE ONCE FITTED BETWEEN THE LUGS THROUGH BOTH SPRING BARS.

IF REQUIRED, ADJUST POSITION ON YOUR WATCH ON THE NATO STRAP.

ENJOY YOUR BREITLING ON ITS NEW NATO STRAP.

insight adsrvr